Stuck in recovery PLEASE HELP!!!

Post here with any questions specific to the use of the i2 on Chrysler vehicles.

Moderator: sohfast94

Post Reply
dshearerjr
Posts: 2
Joined: Sat Nov 23, 2019 10:07 pm

Stuck in recovery PLEASE HELP!!!

Post by dshearerjr »

Ok, so I was updated my tire size and test ride had no speedo and felt like power steering was gone. Service Trailer Brake, Service AntiLock warnings came on as well. tried to do a recovery and that then failed... Now I'm stuck in recovery and every attempt to write stock tune fails. Aaaaaaaannnnndddd. the truck is completely out of commission. this is my business truck and my only truck... I know its stupid to fool around with your only vehicle, but I like modding... haha! Hoping someone can save me. Thank you in advance
dshearerjr
Posts: 2
Joined: Sat Nov 23, 2019 10:07 pm

Re: Stuck in recovery PLEASE HELP!!!

Post by dshearerjr »

Just remembered when I first plugged it in, and clicked restore it said it wasn't supported or something like that? Hit ok and then started again and it connected fine. well until the first off then on... thats when it said "An error occurred while restoring the original tune. please reboot or unplug device and try again."
User avatar
mikel
Posts: 58694
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Stuck in recovery PLEASE HELP!!!

Post by mikel »

what vehicle is this?
disconnect the battery, drain voltage then reconnect and try the recovery process again.
If it fails please give us a call with the device powered up in the vehicle.


Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “i2/i3 for Dodge, Chrysler, Jeep and Ram”