If you load a E.A.S. Pid as a analog gauge it displays the sensor name that you created on the tool.
But if you select a digital gauge it will name it universal A or B and so on, It will not let me edit this.
Anyway to fix this.
Thanks
EAS digital or analog gauge name
Moderator: mikel
Re: EAS digital or analog gauge name
Has anybody has this problem ?
Also if you change from analog to digital or the reverse of that you get a error. It doesn’t matter if it was recorded to tool or streamed to laptop
Just curious if that is a possible cause of not displaying EAS as a digital gauge properly.
Also if you change from analog to digital or the reverse of that you get a error. It doesn’t matter if it was recorded to tool or streamed to laptop
Just curious if that is a possible cause of not displaying EAS as a digital gauge properly.
- Attachments
-
- 0BCAB738-BB12-4D81-8EAB-D3198DC2569D.jpeg (4.99 MiB) Viewed 1183 times
Re: EAS digital or analog gauge name
I see the error. We'll look into it. Thanks!