T1000 unable to power up. Help

Post questions about your Trinity for your Dodge/Jeep/Chrysler vehicles here.

Moderator: mikel

Post Reply
MrMoe
Posts: 8
Joined: Wed Mar 25, 2009 3:28 pm

T1000 unable to power up. Help

Post by MrMoe »

I have an old T1000 and one of the pins on the trinity where the connector goes is broken so the unit won't power up when connected to the OBD Port.
I just had my engine rebuilt after its been sitting for 3 years and it is misfiring. My old engine had a cam In it and the jeep was CMR tuned for it. The new motor does not have a cam In it.
I have my stock tune on my laptop. How can I get my stock tune back into the jeep if my trinity won't work?
User avatar
mikel
Posts: 57766
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: T1000 unable to power up. Help

Post by mikel »

dealer flash?

or you can trade that T1000 in toward a new device and we can use that to load a stock file.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

tech@diablosport.com
Post Reply