I have a 2010 escalade. I am currently using the p2 tuner to make a couple of changes using the stock w/options menu. I have disabled AFM/DOD. Added +50 RPM to idle and park. Turned on Diablo fan setting.
I have noticed the Upshift Torque setting is enabled. Is this a stock setting? Can someone explain it better in layman's terms? My main concern is transmission longevity. Should I leave it enabled?
Also, happy to hear some more feedback on my current settings.
Thanks!
Question about Upshift Torque setting
Moderator: sohfast94
- mikel
- Posts: 57794
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Question about Upshift Torque setting
this allows the pcm to modulate torque on WOT upshifts to help extend trans life. Disabling it will allow the engine to make full torque through the shifts.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
-
- Posts: 2
- Joined: Fri Jul 21, 2023 12:27 pm
Re: Question about Upshift Torque setting
Thanks for the response!
If my main concern is transmission life, I should leave it enabled?
If my main concern is transmission life, I should leave it enabled?
- mikel
- Posts: 57794
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: Question about Upshift Torque setting
yes
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
tech@diablosport.com