Is there a way to have wideband input into our trinity? I need to log with my laptop and a custom dash ?

If so, what is the easiest way to do this or what exactly do i need?

Thank You.

06MonteSS wrote:Click and drag your mouse

tried that and its still moving in chunks and line by line... i want it to be free control where i can move it anywhere, i just don't remember how .

Hi please see picture, how do i get the line cursor to move freely as i want to move it to a certain area , it is controlled and won't allow me, it will move in chunks if that makes sense like every section. I had done it before but can't remember how .

Thanks,

if it has them available for your particular vehicle at all, they would be under a MISFIRE menu, and here's what would be there:

11. Misfire
11.1. Misfire catalyst pass history
11.2. Misfire Catalyst fail history
11.3. Misfire catalyst exceedences
11.4. Misfire emission exceedences
11.5. Max ...

Mikel, yup i got that part but i just don't know which one it is to load it on the current layout i have.

I dont know what the name of the gauges are that captures misfires for all cylinders in order for me to select it .

Does that make sense ?

I have a 2013 dodge challenger HEMI ., basically used the hemi gauge setup but added Air change and made it customized. Just not sure which gauge is misfire , if there is ?

Mikel or anybody else that can assist.

Where is the misfire gauge in trinity ? Can i check all 8 cylinders on misfire ?

In dataviewer i do have misfire section with 2 fields under that KNK LT RETARD (deg), and KNK ST RETARD (DEG)
but i am not sure what that is ?

Trying to log all my cylinders ...

speed vs time allows you to calculate distance, but 60 ft would be all over the place calculated like that.

the track is the only place to get an accurate 60' time unfortunately.

I was just hoping since we track 1/4 with speed vs time, maybe use the same theory for 60ft times ( speed vs time ...

mikel wrote:Its not feasible as the tool has no way to measure distance....

oh ok that is good to know. How does it know 1/4 mile distance or is it really measuring speed instead of actual 1/4 mile distance ?

track is your only legit option here.

Mikel,

Thanks for your reply, I was wondering who from diablosport i can request this feature to ? If trinity engineers can add it to the 0-60mph results page or maybe have 60ft just alone option like it does have 1/4 , 1/8 , 0-100MPH , etc ?

Thank You ...

Hi All,

I would like to time my 60FT time, basically just time my take off but can the Trinity track this ? I see the 0-100 MPH, 1/8 mile, 1/4 mile, but is there somewhere in this device that can track my 60ft time ?

Or any ideas how i can accomplish this other than going to track ?

Thanks,

hi everybody - been getting my car tuned remotely , did some local city driving and idle for air/fuel ratio and time mapping. Did also WOT at the dyno shop and my tuner got some great gains .

I will ask him on a weekday but also wanted others opinion.

After what i have done so far, is there ...

it wouldn't let you use a wrong/different version original backup file.. when you try to install it, you will get errors..

if you have an old outdated original backup stock tune file, just delete it from your computer so there's no confusion ;)

that way you'll know you are always selecting the ...

Guys / Gals,

How do i reverse the modified tune i used in my current tune ?

I installed a custom tune and then modified the tune by going in the parameters and changing the idle AC on D drive under IDLE .

Well i re-installed the file from my computer that has original parameters back into my ...

I guess what I am trying to say is if I load the correct Tune but I pair it with the wrong original backup file from DS downloader , and into my car.

Will my car not run good since I don't have the correct original backup file ?

Or is the backup file only used for ds downloader when comparing ...