Yes, thanks Cole. I will definitely be looking to purchase the CMR system when it becomes available...hopefully not too much longer!

Predator manual says Fuel Rail Pressure, but which rail/sensor is reporting this reading? My fuel pressure gauge at on end of passenger side rail says 22 psi at idle while Predator data logging says constant 38-42 psi under all conditions except at cold start, where it spikes to 50-70 psi. I'm ...

When Diablosport does make the CMR product available to end users, will any sort of training be available for the proper use of the product? I'm sure this is one of big sticking points in selling this product to the general public...first to understand what each tuning variable controls, and equally ...

I am data logging on my 2003 Mustang Mach 1 using a U7146 Predator. One paramater I am logging is fuel pressure, reported as "FRP". Question is, where is this pressure being measured that is being reported by my Predator, and what does the acronym "FRP" stand for? Is this "Fuel Rail Pressure"? If so ...

When Diablosport does make the CMR product available to end users, will any sort of training be available for the proper use of the product? I'm sure this is one of big sticking points in selling this product to the general public...first to understand what each tuning variable controls, and equally ...

Thanks Chris, guess I was pretty close!

When data logging the MAF and TPS sensor voltages are reported as "A/D Counts" and not voltage. The readings (at idle of 750 rpm) are approx. 168-169 for MAF Counts and 196-197 for TPS Counts. I am using a MAFia interface set to "2" correction between ECU and MAF sensor.

This appears to be the ...

Hey guys, data logging/playback works great - really glad I was able to get this set-up. One parameter I was measuring was MAF voltage. As I was logging the display showed it as Volts, howver in playback mode it shows as A/D "hits" intead of voltage. I was trying to create an MAF air flow (or even ...

Discovered I had the wrong bit rate setting in the CMR_DAT program. When I seletced 57600 baud it started communicating with my PC. Sorry for the hassle. I'll let you know if I have any other questions.

Chris,

I did as you suggested...installed CMT_DAT.exe program, reset live parameters on the Predator, data logged on my ride into work this morning, and got as far as uploading the file from Predator to my PC, however an error message "Aborting Communication" came up. Nothing...no packets or ...

Thanks Chris. I'll try the data logging function one more time. When I tried it last it didn't work which prompted my call (and purchase of AutoTap).

Sorry...I'm using a U7146.

My bad!

I have a U7140 used by my local Diablosport authorized speed shop to custom tune my 2003 Mach 1 with ProCharger supercharger system, 42 lb injectors, Cobra pumps/tank and Autolite copper 103 plugs gapped to 0.035”. Over the last couple of months I have been attempting to diagnose a stalling/rpm dip ...