2006 dodge with newest cal id of 50325053ab

[REESER]

HELP ME I NEED TO KNOW WHEN OR IF THERE IS ANOTHER UPDATE COMING THAT INCLUDES THE CAL ID OF 50325053ab. THANKS

[mikel]

This should be inthe latest revision, are you on 9r05?

[REESER]

ya i do have that update and still would not accept the cal id but i havent had time to mess with it in a while but i am fixen to download what now looks like an even newer update and i will let you know if it works

[REESER]

ok i updated the predator with the new 9r06 update and still will not work with this cal id 50325053ab. i guess the only answer is to now get the new reflash from dodge because i would assume the cal id that is being flashed into thousands of vehicles will be
in this currect update. please let me know if there is a differnet answer because i would rather not take my truck into the dealer
since i have to drive 400 miles to get there.

[mikel]

no need to go to the dealer, we will fox this on our end.

[REESER]

please update me on here when you have a answer on what to do so i can update tool or whatever thanks for the reply on the issue

[REESER]

ohh i have a question about a different vehicle and maybe you can help me. i took a 2002 dodge 5.9L cummins out of a recked truck and put the motor in my motor home replacing the old 12v cummins that blew on me. the new motor runns great and has
mush better power but i would like more!!!!! it is a 2002 24v cummins and i have it all wired in and runns but i have no DLC connector as if it was in a vehicle. is there a product i can buy to wire into the com lines from the cummins ecm so i can use a
preditor type product or can i use a power puck with out bothering with DLC adapter or or or??? can you shed a light on jucin this house on wheels up a little? thanks. I would like to have someway of hooking into the cummins computor so i can see faults/sensors/ect.... so if this is possible or there is a product for this let me know anyway thanks.

[mikel]

please update me on here when you have a answer on what to do so i can update tool or whatever thanks for the reply on the issue

Have you tried 9r06 yet?

[REESER]

yes i updated my preditor with 9r06 and tried and still does not reconize my cal id

[mikel]

Is this a Cummins?

I dont have that calid listed as a Cummins anywhere.

[REESER]

yes this is a cummins i have owned it for almost 5 years and have put 70000 miles worth of diesel threw it!!!!!!!!!!! what kinda of question is that!!!!! you should have just asked me if i am retarted and if i know what i drive. yes it is a 2006 dodge cummins deisel
double cab short bed red with 4 tires and a spare and 4 of the brightest HID head lights you can buy and i think i need to flash you with them so you can see the light!!!! this is a rediculous question to ask someone about there vehicle which they have been on
here bitchin about the bullshit program update crap that a person has to go threw to get a product that you sell and say you stand behind but i have had nothing but problems with getting a update that will work with this cal id...... either tell me to buy something else if you dont want my business or get me a update with this cal id. i just checked it last night again to make sure i the numbers all right and they are this is a legitament cal id that i have from a dodge dealer who replaced my ecm and calibrated it to the most recent cal id at that time. since then yes there has been new updates and now a massive recall with a reporgram aswell so i know this is a old number but i dont want to drive 400 miles to get a reflash on my truck. i have been a mechanic for over 10years and i cannot beleive some of the questions and answers your give to customers on this site if they knew half of what i do about vehicles they would be feeling the same as me right now.... please give me a real answer to my problem or i can just take my business and everyone i know and divert them from this bs that i have been put threw...!

[mikel]

sir, theres no need for all of that.

According to Chrysler, the calid you listed is NOT a valid calibration for any Cummins PCM they support. Hence my question.
You'd be amazed how often people will post an issue in the wrong section of the forum, so I ask this to make sure we dont spend time going in the wrong direction looking for an issue that does not exist.

Please recheck the calibration ID you posted and let me know.

Thanks.

[REESER]

like i just said in my last post.... i checked it again just last night and it is correct. here is the deal i bought a 06 with 600ftlbs out the
door and i had some cold idle issues and they had a repro for the problem and they did the repro and i left that day with only 400
and they would not hear me that my truck lost a 3rd of its power and i delt with them for over a year trying to convice them and
they had no answers. i even took service manager for a ride with a 4 place snow trailer with 4 sleds and i had no problems towing up the hill out of town at whatever speed i wanted to not being able to pull hill at 55 with it to the floor and he said that was normal and i almost let him out the truck. about 3 months after that my ecm finally took a shit and they put a new one in and programmed it from a empty box then i drove it for about 2 days with your programmer on there which was great and then i lost the ecm again after restoring the oem program to take truck to shop for some engine work. so they put another ecm in and told
me the last ecm program was bad from chrysler and they knew it and caused ecm to go out they said i was lucky to make it 2 days
but it was because i had your programmer on there for those 2 days but they dont know that haha. so another ecm with the new cal id of -(current)- and since then i can use the programmer. i went to dealer one time while i was there for a weekend and they said it was the current calibration but this was before the new recall. that is the story i dont plan on going back to that town for a while and i like how my truck runns so i have no need to go so if you can add this id then tell me yes or no so i can plan on going there to get the new recall done i only got to use this thing for 2 days and i have owned it for a year there in lies the problem

[mikel]

OK, this is an odd situation, we'll have to do some digging to see if we can find some help onthis.

[REESER]

ok i will let you know if for somer reason i end up getting the reflash for recall but at this time i not going to dealer for a while. i really am confused by this aswell because i did some research and i found nothing about this cal id on anything and i called the dealer
and they said that they really couldnt tell me if this is a good cal id because only cal id they can look up is what is current in there
scanners which is the new recall id. thanks for the effort on your end