Ahem...OK...TCM support anyone???

Post by **mikel** » Tue Oct 11, 2011 2:39 pm

Yes. Its here.

We have a test crom that adds T43 (any 6 speed auto) support to the current Trinity applications.

The crom as it sits will have tunes for the latest TCM calibrations available from GM.

If your TCM has not been updated for whatever reason, the tool will still allow you to tune the PCM, and it will save a copy of your stock TCM tune, so you can email it to us so we can add support for it.

We're looking to gain 2 things here:
1. Feedback on the TCM tunes, parameters, etc.
2. To gather a bunch of older TCM calids as to be able to offer a full line of plug and play support in the release.

I am not making this update public at this time.
If you would like to test it out, please email me at mlitsch @ diablosport.com and request the crom, and I'll send it out to those who would like to test it out.

Thanks, and enjoy!

Post by **mikel** » Tue Oct 11, 2011 2:40 pm

T42 (4 speed auto) support is up next

Post by **06MonteSS** » Tue Oct 11, 2011 4:43 pm

mikel wrote:T42 (4 speed auto) support is up next

WOOHOOOOOO!!!!!!! FINALLY!!

Post by **mikel** » Tue Oct 11, 2011 6:08 pm

Wow...a whole day has gone by and no takers yet???

I thought about it...you dont need to email me, just post up, I can get your email from here on the forum...

11z71 · Post by **11z71** » Tue Oct 11, 2011 7:57 pm

I'll take you up on it. I take it it will work on a 6l80e?

CANUCKPREDATOR · Post by **CANUCKPREDATOR** » Tue Oct 11, 2011 9:47 pm

I'll try it for you

rlkimmel · Post by **rlkimmel** » Tue Oct 11, 2011 11:48 pm

I'm still here, lurking around.

2010 Colorado 5.3L V8 (code P) and 4L60E

Post by **mikel** » Wed Oct 12, 2011 10:32 am

11z71 wrote:I'll take you up on it. I take it it will work on a 6l80e?

sent!

Post by **mikel** » Wed Oct 12, 2011 10:32 am

CANUCKPREDATOR wrote:I'll try it for you

you got it!

Post by **sohfast94** » Wed Oct 12, 2011 1:19 pm

Nom nom nom Email sent!

Mike_Levy · Post by **Mike_Levy** » Wed Oct 12, 2011 1:51 pm

I really want to, but no E67 support yet.

I hate the 6L90. Its dumb and doesn't shift right.

11z71 · Post by **11z71** » Wed Oct 12, 2011 2:30 pm

Thanks mike! I'll keep ya posted.

bulletpryor86 · Post by **bulletpryor86** » Wed Oct 12, 2011 10:56 pm

Send me one too

11z71 · Post by **11z71** » Thu Oct 13, 2011 8:10 am

Got everything downloaded to my trinity but unfortunately my tcm is unsupported, bummer. I will try post up or email a copy of the original back up to you mike within the next day or so. Out of curiosity, I was able to see some of the parameters listed which was part throttle shift rpm and wide open throttle shift pressures, will I be able to see more parameters once my tcm is supported? Thanks.

Post by **mikel** » Thu Oct 13, 2011 9:46 am

No, its the same list of parameters...what else were you looking for?

Get me that file asap so we can get it added.

Thanks

Ahem...OK...TCM support anyone???

Ahem...OK...TCM support anyone???

RE: Ahem...OK...TCM support asnyone???

Re: RE: Ahem...OK...TCM support asnyone???

RE: Re: RE: Ahem...OK...TCM support asnyone???

RE: Re: RE: Ahem...OK...TCM support asnyone???

RE: Re: RE: Ahem...OK...TCM support asnyone???

TCM testing

Re: RE: Re: RE: Ahem...OK...TCM support asnyone???

Re: RE: Re: RE: Ahem...OK...TCM support asnyone???

RE: Re: RE: Re: RE: Ahem...OK...TCM support asnyone???

RE: Re: RE: Re: RE: Ahem...OK...TCM support asnyone???

RE: Re: RE: Re: RE: Ahem...OK...TCM support asnyone???