intune wont load

Post questions or any issues with your inTune here.
Post Reply
juanpan4293
Posts: 2
Joined: Wed Mar 28, 2012 8:01 pm

intune wont load

Post by juanpan4293 »

I have a 2008 v6 mustang and just got the intune for it. I was excited now im just mad. The intune wont load.... what do i need to do?
User avatar
mikel
Posts: 58800
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

RE: intune wont load

Post by mikel »

What does it say when you try to tune the car?

It may need an update to add support for the Ford vehicles.

Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
juanpan4293
Posts: 2
Joined: Wed Mar 28, 2012 8:01 pm

Post by juanpan4293 »

it doesnt even give me the chance to tune the car. I plug it in and it turns on and gets stuck on the loading screeen. it doesnt go to the home screen.
User avatar
mikel
Posts: 58800
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Post by mikel »

please fill out the rma request form and we'll take care of it asap.

Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
tomworld9
Posts: 2
Joined: Sun Apr 01, 2012 2:13 pm

Post by tomworld9 »

I have a similar problem with my Ford f150 (2004)
as soon as I turn the vehicle on the device makes lie it is reading the vehicle then spits me back to the "tune vehicle" sceen and when I press it again It tells me the sensor is not attached...
I have looked for an update of the devices firmware, but cannot find anything. I spent an hour waiting on you hotline Friday with no response...
I am about ready to take the unit back so I hope I can get some usefull advice by tomorrow. I hope these forum messages send forward your reply to my email address.
thanks
Tom
User avatar
mikel
Posts: 58800
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Post by mikel »

tomworld9 wrote:I have a similar problem with my Ford f150 (2004)
as soon as I turn the vehicle on the device makes lie it is reading the vehicle then spits me back to the "tune vehicle" sceen and when I press it again It tells me the sensor is not attached...
I have looked for an update of the devices firmware, but cannot find anything. I spent an hour waiting on you hotline Friday with no response...
I am about ready to take the unit back so I hope I can get some usefull advice by tomorrow. I hope these forum messages send forward your reply to my email address.
thanks
Tom
can you post the tools info.xml file from the intune drive?

Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “General inTune forum”