Hey Guys,
I've had a Predator for awhile. I decided that I want a boost gauge and an A/F R gauge, both digital.
My basic question for tonight is.: If I get a Trinity and set it up to display those gauges: Will I have to do anything to display those gauges every time I turn the car on? Or, can I set it up to turn itself on and monitor or record those gauges every time I start the car?
Thanks,
Basic question: Gauges. Engine start up.
Moderator: mikel
Basic question: Gauges. Engine start up.
Rick
2009 Challenger SRT
Kenne Bell 2.8LC Supercharger
2009 Challenger SRT
Kenne Bell 2.8LC Supercharger
- mikel
- Posts: 58685
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: Basic question: Gauges. Engine start up.
Yup, it will turn itself on and off with the car...nothing to do.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
Re: Basic question: Gauges. Engine start up.
Hey Guys, been gone a little while, but this is a great thought, I'd like to do this also. Is there any trick to this or is it just a straight forward gauge set up. My Trinity is the old style, will it run down my battery?ricks wrote:Hey Guys,
I've had a Predator for awhile. I decided that I want a boost gauge and an A/F R gauge, both digital.
My basic question for tonight is.: If I get a Trinity and set it up to display those gauges: Will I have to do anything to display those gauges every time I turn the car on? Or, can I set it up to turn itself on and monitor or record those gauges every time I start the car?
Thanks,
Good thinking, ricks.... and thanks Diablo!
"El Magnifico" 2009 Challenger SRT8 AutoStick, Corsa Sport Catback Exhaust, Trinity 91 Modified Tune, 180 T-stat, Moroso Catch Can, DMH Electronic Cut Outs, ProTorque Billet Stator 3200 RPM High Stall Torque Converter, K&N, BFG 295/40/20w Rear Tires
- JonDiablosport
- Posts: 152
- Joined: Mon Sep 19, 2011 9:14 am
RE: Re: Basic question: Gauges. Engine start up.
if the unit goes to sleep when plugged in now, it will do the same after analog inputs are added.