Anyone want to play with TCM support?

[2500hdandk20]

This is for Mikel, I have been talking to Lew, and I called support and talked to Jon, so here it goes. I updated my Intune (App:1r02a and GM tune Db: 1t01ga) I plug in the intune and all it wants to do is backup my ecm, it never asks about the tcm, Jon told me to update my tcm at a dealer. So I went in and a good buddy of mine that works there plugged in the update tool, the tranny was all up to date, but the ecm had one update. Here is a picture of the TCM updates and my Vin #. I guess my next question is do you have tcm for the 6l90e?

[mikel]

This is for Mikel, I have been talking to Lew, and I called support and talked to Jon, so here it goes. I updated my Intune (App:1r02a and GM tune Db: 1t01ga) I plug in the intune and all it wants to do is backup my ecm, it never asks about the tcm, Jon told me to update my tcm at a dealer. So I went in and a good buddy of mine that works there plugged in the update tool, the tranny was all up to date, but the ecm had one update. Here is a picture of the TCM updates and my Vin #. I guess my next question is do you have tcm for the 6l90e?

You should be added as of 1r01g GM tunes DB.

[mikel]

he's checking it out.

Mike, any word on tcm support for my truck?

still looking into this one.

[alghanim]

Mikel,
hi i have the intune and updated to(1r02a) ive add the the TCM file which is on page 7
it shows on the tool GM Tune Db :1t01ff(ok)
but still unable to find TCM in my parameters
my truck is 2012 GMC Denali with 6.2
VIN 3GTP29E25CG154100
thanks.
khalifa

[mikel]

Mikel,
hi i have the intune and updated to(1r02a) ive add the the TCM file which is on page 7
it shows on the tool GM Tune Db :1t01ff(ok)
but still unable to find TCM in my parameters
my truck is 2012 GMC Denali with 6.2
VIN 3GTP29E25CG154100
thanks.
khalifa

you should be using the latest release version, connect to the updater and click update/check now.

Thanks

[alghanim]

Mikel,
i have update the tool with latest release 1r01g..and still no TCM in the parameters,
i also try the 1t01ha with no luck ..
VIN 3GTP29E25CG154100
2012 GMC Denali with 6.2

[rdss]

Fapenhamp wants TCM support! On a serious note, just got home and made the mistake of updating my inTune 20 minutes before I wanted to go to bed. 70 minutes later it's up to date. I plan on getting it installed with TCM support and can't wait to see what all of y'all have been enjoying for a few months now.

[BlackZ71Silverado]

LOL.........70mins. is nothing compared to how long we waited....You are going to love it, worth the wait.

[rdss]

Yeah, going in today. Using the firm TCM setting. Once this tank of gas is gone I'm going to see what Lew's 93 octane tune is all about, it s going to be great.

[wmd3]

Hi Mike,
Thanks to all for the thread so I dont have to ask so many questions
I downloaded the GM tune by accident, I have 2007 Dodge Ram 1500 hemi 5.7 Vin is 1D7HU18267S216572
intune version 1r02b
LTW 87 octane tune
Calid 05094405AJ
tune db DCX 1r01b
PID DB 1r01a
Long thread but I think I read that Dodge TCM has always been there? Its not formally called TCM but I see pressures for 1-2 2-3 but not 3-4. I updated, rebotted and updated again. Do you see any flaws in my process.
Thanks in advance

[035.3Z71]

Is torque reduction management and TCM tune not the same? My 03 Silverado has the torque reduction, but nothing about a TCM tune. I got the Intune last thursday and it was up to date as of yesterday...

[06MonteSS]

your 2003 does not have a separate TCM module for the tranny - you won't have a separate TCM tune.. it is part of your single PCM which controls both the engine and transmission settings...

so for your older truck, the torque reduction setting is for the tranny settings, yes...

[mikel]

Have you tried the latest GM tune DB?

[mikel]

still looking into this one.

Mike, any news on tcm support for my NBS truck?

"Bueller???? Bueller????" Mike, did you figure out why my tool still doesnt have tcm support after the update?