CALID 68004309AE is not supported

[dogarms]

After completely updating my Trinity prior to the initial connection to my 2010 Challenger SRT8, the following is displayed after touching either the "Accept" and "Decline" buttons on the screen:

This vehicle needs an update. Download here: Diablosport.com/dcx Calid: 68004309AD.

Calibration is 68004309AE and is not supported. We need to downgrade to 68004309AD in order to continue.

Trinity dcx_gas does not support CALID: 68004309AE. Tool update might be available.

Trinity does not support this vehicle. Call (561) 908-0040 x 1 with your CALID, reflash might be required. Press enter to view CALID: PCM 68004309AE.

Please let me know what the next step is since the phone number isn't answered on the weekends, which is the only time I can work on my car.

Thanks

[dogarms]

After completely updating my Trinity prior to the initial connection to my 2010 Challenger SRT8, the following is displayed after touching either the "Accept" and "Decline" buttons on the screen:

This vehicle needs an update. Download here: Diablosport.com/dcx Calid: 68004309AD.

Calibration is 68004309AE and is not supported. We need to downgrade to 68004309AD in order to continue.

Trinity dcx_gas does not support CALID: 68004309AE. Tool update might be available.

Trinity does not support this vehicle. Call (561) 908-0040 x 1 with your CALID, reflash might be required. Press enter to view CALID: PCM 68004309AE.

Please let me know what the next step is since the phone number isn't answered on the weekends, which is the only time I can work on my car.

Thanks

I did the update online and loaded the downgraded PCM onto the car. Any reason that there isn't a Diablo PCM that matches the PCM flash update the dealer did on the car a couple of weeks ago (68004309AE)?

On another note, I also can't find a place to select the type of transmission on the Trinity. Does it already know what kind I have (it's a 6 speed manual) from the VIN or some other identifier it's reading?

[mikel]

it determines what trans from the calid of the backup file it reads out.

Thanks

[dogarms]

OK, tranny issue understood.

So when I reload the backup tune whenever I go back to the dealer, will the "AE" PCM be reloaded too, or will the dealer have to do the upgrade again?
Will Diablo be coming out with the AE version someday?

[dogarms]

Bump -

Will Diablo be coming out with the AE version someday?

[mikel]

tough to say....

[Ranaram10]

Tough to say?

[AZHEMI]

Thats the common answer....welcome to the club