Latest Intune release here.

GhostC6 · Post by **GhostC6** » Sun Jan 04, 2015 6:22 pm

Hey guys, I just purchased the Diablo Intune and it should arrive on the 7th, I need to know what updates and tunes do I need to download out of the box for my 2005 corvette to bring it up to date with the latest tunes and updates. Thank you, also, if you can post them or a link to them I would appreciate it very much.

GhostC6

LAMICA · Post by **LAMICA** » Mon Jan 05, 2015 9:44 pm

I accidentally updated with 104 first. How do I erase 1r04d and instal 1r03y first. Using a mac book.

Post by **06MonteSS** » Mon Jan 05, 2015 10:26 pm

you can't.. and no need to... if it already updated to the latest 1r04d, then it's fine.. no need for the older 1r03y...

you can not go backwards on revision updates.. no need to.. 1r04 is the newest and latest updates...

LAMICA · Post by **LAMICA** » Mon Jan 05, 2015 10:40 pm

Thanks for the help. now I am running into the same issue some people on the forums has expressed. . Plug into the truck and tells me PCM calibration for (VIN) might need update. check calibration update. I hit "X" to cancel it tells me my vehicle is not supported. I have a 2014 ram 1500 Hemi with electronic shift.

Post by **06MonteSS** » Tue Jan 06, 2015 10:43 am

you have a 2014 dodge... so you'd need to have the inTune-DCX version tool, not the regular inTune...

Do you have the inTune-DCX tool?

Heavys5.7 · Post by **Heavys5.7** » Tue Jan 06, 2015 1:14 pm

I do have the dcx and it tells me the same thing and except for the vehicle not supported part just goes back to the write tune screen i have 12 challenger

Post by **mikel** » Tue Jan 06, 2015 1:26 pm

please post the info.xml file from the intune drive.

Heavys5.7 · Post by **Heavys5.7** » Tue Jan 06, 2015 1:29 pm

was with tech support this morning should be all up to date but one sec
/Volumes/INTUNE/info.xml

tobe1onfire · Post by **tobe1onfire** » Sat Jan 10, 2015 4:29 pm

hello I have a 2007 charger SRT 8 6.1 what is the latest update I need .

thank you
geo

scrambler84 · Post by **scrambler84** » Wed Jan 14, 2015 3:06 pm

I've used my intune several times without issue. Today I tried to change to a different tune and received "the pcm might need calibration" message

Please help. I've included the info file.

Thanks

rosesinmay · Post by **rosesinmay** » Fri Jan 16, 2015 5:37 am

Hi,
I tried to install the latest update but can't be it show me a message say the firmware 1r03. not supported.

how it can be???

k9dojo · Post by **k9dojo** » Mon Jan 19, 2015 7:11 am

mike i have a SRT 8 jeep 2014 have no idea what program to run can you help :drivingbad:

scrambler84 · Post by **scrambler84** » Thu Jan 22, 2015 10:17 pm

Anybody checking this thread?

rutrider141 · Post by **rutrider141** » Fri Jan 23, 2015 2:40 am

I am just wondering if u guys offer a smoke tune that I could download

Post by **mikel** » Fri Jan 23, 2015 9:21 am

No...thats not something the EPA is cool with

Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.

Re: Latest Intune release here.