2010 RAM Tuning
Moderator: mikel
- speedsport
- Posts: 55
- Joined: Tue Dec 02, 2008 6:29 pm
2010 RAM Tuning
OK, let me get this straight.. We are supposed to tune these trucks via the "Nueral Network" but this tune from RIPP has had zero mods to any tables in the Network............ Help me understand anybody
- Attachments
-
- bjornramnew1b.drg
- (75.96 KiB) Downloaded 270 times
- mikel
- Posts: 58726
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: 2010 RAM Tuning
Do you not have access to the cmr dealer forums?
Good reading there:
http://www.diablosport.com/forum/viewto ... 21&t=50799
Good reading there:
http://www.diablosport.com/forum/viewto ... 21&t=50799
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
- speedsport
- Posts: 55
- Joined: Tue Dec 02, 2008 6:29 pm
Re: 2010 RAM Tuning
Thank You... I look all over and never seem to find anything worth reading... This is good stuff....After reading am I (we) to assume the stock VE tables should be left alone and tune to injector slopes, Etc??????? If yes, is my Nueral Network disabled and where can I re- enable it??? Thank You in advance
- mikel
- Posts: 58726
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
Re: 2010 RAM Tuning
scalars/diagnostics
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]