2015 Jeep SRT NEW PCM Supercharger No tunes?

[redvapor01]

I installed computer tested everything runs fine.. Add Intunes i2 download update connected to car Vehicle not supported. Downloaded again downloaded again downloaded 2 things groupupdate.itfg and 05036071ad.drg plug back in to car and it says turn key on and updating calibration. A little while later it says it complete goes thru a test turn key off wait 3 ec turn key on wait 3 sec than it says unplug or I think hit enter. I hit the button again and it says again vehicle not supported.. I update same thing happens 2 files download says calibration update for 1c4rjfdjofcxxxxxx (my vin). plug it into car again does same as before when finished I start the process again and it says again vehicle not supported. I update again "Ground hog Day" What do I do next??? This is a kit I bought from Ripp with their supercharger kit. please help

[mikel]

please post the info.xml file from the i2 drive here.

[redvapor01]

please post the info.xml file from the i2 drive here.

you are already working this issue thru Ripp Superchargers>>> I will post updates They/ you are getting me the ripp tune now

[redvapor01]

please post the info.xml file from the i2 drive here.

you are already working this issue thru Ripp Superchargers>>> I will post updates They/ you are getting me the ripp tune now

Got an update from Ross at RIPP and he tells me Diablo is working on the programing as we speak. no firm ETA yet.. 2015 Gremlins... Thanks in advance DiabloSport

[redvapor01]

please post the info.xml file from the i2 drive here.

This is the 2015 SRT Jeep with your PCM and a Ripp kit. Ross sent you the information Friday. Just checking on updates. All files requested have been sent thru Ripp.

[redvapor01]

please post the info.xml file from the i2 drive here.

DID you get the information you need from RIPP??? should I send it again???

[mikel]

The RIPP tool does not yet support the GCSRT8 for 2015. You may be best having it replaced with a standard i2010.

Thanks

[redvapor01]

The RIPP tool does not yet support the GCSRT8 for 2015. You may be best having it replaced with a standard i2010.

Thanks

Diablo Has unlocked the code!!! I now have their computer with a supercharger and their tuner working together. The programmer worked flawlessly once we had the right cal id unlocked( whatever that is) Thanks Diablo

[mikel]

ran one of these ripp 2015 GCSRT8 things on the dyno here yesterday....550 rwhp on our 2WD dyno....what a beast.

[redvapor01]

ran one of these ripp 2015 GCSRT8 things on the dyno here yesterday....550 rwhp on our 2WD dyno....what a beast.

As soon as you had that one set up that's the tune you guys sent me. my 0 to 60 is 3.7

[mikel]

nice...