2013 silverado Ltz z71 settings questions

Post here with any questions regarding the use of the i2 on supported Chevrolet, GMC, Cadillac, Buick, and Pontiac applications.

Moderator: sohfast94

Post Reply
Turtdogg
Posts: 2
Joined: Wed Mar 30, 2016 9:06 pm

2013 silverado Ltz z71 settings questions

Post by Turtdogg »

What are the best settings for throttle response on takeoff? So far I've installed the diablo tune and am running 93 octane, turned off the torque management, and disabled the afm. I still feel like I need to adjust something for the throttle response from a dead standstill to takeoff. Any advice?
gregory
Posts: 33
Joined: Fri Oct 09, 2015 3:24 pm

Re: 2013 silverado Ltz z71 settings questions

Post by gregory »

You may want to put a couple hundred miles on the tune first, it will change as computer learns and adjust to new program. :drivingbad:
User avatar
06MonteSS
Posts: 18087
Joined: Tue Jan 23, 2007 11:33 am
Contact:

Re: 2013 silverado Ltz z71 settings questions

Post by 06MonteSS »

yeah, Every time you install a tune, all of the learned items like idle, airflow, fueling/fuel trims, emissions readiness tests, etc. all get erased/reset... It takes days/150+ miles to be put on for everything to be relearned by the ECM/TCM and settle back in again before you'd be able to do a data log.

and there is no throttle parameter on that 2013 truck.. that parameter is only available on 2014 and newer vehicles/ECM's..
06MonteSS / DiabLew Tune
Image
2014 Camaro SS - 2SS, RS pkg., short-throw shifter, NPP perf. exhaust, BMR strut-tower brace, Cold Air Inductions cold air intake
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com -- www.diablocustomtuning.net
Post Reply

Return to “i2/i3 for GM vehicles”