2018 Jeep Wrangler SKIM removal

Post here with any questions specific to the use of the i2 on Chrysler vehicles.

Moderator: sohfast94

Post Reply
etdavenport
Posts: 3
Joined: Sat Nov 09, 2019 1:37 am

2018 Jeep Wrangler SKIM removal

Post by etdavenport »

I live in the middle of nowhere in Bethel Alaska. We are about as remote as it gets. We only have one programmed key left and if we so much as get it wet we are screwed.

I recently bought a trinity programmer and pcm swap for the Wrangler hoping it would kill the security SKIM. Is this possible? was that something I need to ask for specifically? I have not yet returned the factory PCM. Can I get this done if the programmer cannot do it for me?
User avatar
MagsTuning
Posts: 113
Joined: Fri Oct 11, 2019 1:17 pm
Location: Tifton GA
Contact:

Re: 2018 Jeep Wrangler SKIM removal

Post by MagsTuning »

etdavenport wrote:I live in the middle of nowhere in Bethel Alaska. We are about as remote as it gets. We only have one programmed key left and if we so much as get it wet we are screwed.

I recently bought a trinity programmer and pcm swap for the Wrangler hoping it would kill the security SKIM. Is this possible? was that something I need to ask for specifically? I have not yet returned the factory PCM. Can I get this done if the programmer cannot do it for me?
Have you written the Trinity to the vehicle yet? If you have post your back up and last tune written.
Image
User avatar
mikel
Posts: 58701
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: 2018 Jeep Wrangler SKIM removal

Post by mikel »

SKIM is usually outside the calibration area that we read/write.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “i2/i3 for Dodge, Chrysler, Jeep and Ram”