Weird noise after installing tuner

This area of the forum is for discussions relating to the T2 monitor/tuner on Chrysler vehicles.

Moderator: sohfast94

Post Reply
Elkins5150
Posts: 2
Joined: Mon Jun 05, 2023 10:48 pm

Weird noise after installing tuner

Post by Elkins5150 »

I got a 2015 challenger srt 392 I installed the Trinity t2 and pcm and between 1500 and 2500 rpm’s it makes a rattling noise I’ve tried all the tunes and now have reset it and the noise is still there
User avatar
mikel
Posts: 58677
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Weird noise after installing tuner

Post by mikel »

where is the noise coming from?
Theres really nothing a tune can do to create a noise...
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Elkins5150
Posts: 2
Joined: Mon Jun 05, 2023 10:48 pm

Re: Weird noise after installing tuner

Post by Elkins5150 »

It sounds like the engine or maybe the transmission idk I’m so frustrated with this car I not sure what to o next I messed up when I swapped pcms it already had a pcm from you guys Installed and I didn’t k ow that till I went to swap them I put the new one in tried the tunes and this noise started so I went back to the original pcm the noise wasn’t there at first so I tried one of the tunes on it and the noise came back could very well be a coincidence but I messed up by resetting the pcm back to the way it was only didn’t think about it restring it to the back up it made from the new pcm so now I lost the original tune that you guys apparently did that ran great the only reason I tried the tuner was cause I was getting check engine lights for excessive fuel and it won’t go through deq I thought this would cure that now Igor myself in a mess I think any help would be much appreciated
Thanks
Post Reply

Return to “T2 for Dodge/Chrysler/Jeep/Ram”