2005 5.7 Jeep Hemi No more Cruise Control even with Backup recovery

All General Questions can be posted here

Moderators: 06MonteSS, mikel

Post Reply
Radioactive87
Posts: 7
Joined: Sat May 10, 2025 5:48 am

2005 5.7 Jeep Hemi No more Cruise Control even with Backup recovery

Post by Radioactive87 »

Hey Guys
Greetings from Germany,

I have a 2005 Jeep GC Hemi 5.7. Every Hardware is Stock and very well serviced. Car has about 105.000km ~ 65.000 miles.
I bought an intune i3 Platinum last week.
I installed 91 Octane Tune and set MDS off.
Car runs great BUT i don't have Cruise Control anymore. At 0 to maybe 5 mph it works...but when i go over that it disables the Cruise Control and wont come on again.
I tried do restore the Backup.....but then i got cylinder 1 and 6 reactivation Performance Control Error and the Car runs like shit. So i modifed the Stock tune - to turn off MDS again - now it runs on all cylinders again...but still no cruise Control.....and it seems i can not go back to stock again because then i have the Cylinder 1 and 6 problems again - but MDS worked really well before starting with tuning.
Pls Help! I want my Cruise Control back.....when MDS will work again too would be great...but Cruise Control is more needed.

Best Regards
Mike
Radioactive87
Posts: 7
Joined: Sat May 10, 2025 5:48 am

Re: 2005 5.7 Jeep Hemi No more Cruise Control even with Backup recovery

Post by Radioactive87 »

*push
Radioactive87
Posts: 7
Joined: Sat May 10, 2025 5:48 am

Re: 2005 5.7 Jeep Hemi No more Cruise Control even with Backup recovery

Post by Radioactive87 »

Seems nobody is active here :-((((
User avatar
mikel
Posts: 58670
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: 2005 5.7 Jeep Hemi No more Cruise Control even with Backup recovery

Post by mikel »

we were already communicating in the other thread, so I hadn't responded here...

viewtopic.php?p=433338#p433338


Thanks
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “General Questions”