T2 with DS Unlocked PCM from Another Vehicle – Installation Process?

This area of the forum is for discussions relating to the T2 monitor/tuner on Chrysler vehicles.

Moderator: sohfast94

Post Reply
yusufknight63
Posts: 1
Joined: Wed Mar 25, 2026 3:36 am

T2 with DS Unlocked PCM from Another Vehicle – Installation Process?

Post by yusufknight63 »

Hi everyone,

I’m trying to figure out the correct procedure for installing a Diablosport unlocked PCM from my previous car into a new one.

Both vehicles are Scat Pack models (2021 to 2023), and I’d like to reuse the unlocked PCM instead of going through the unlock process again.

Has anyone done this before? Are there any specific steps required (relearn procedures, VIN issues, compatibility checks, etc.) when swapping the PCM between vehicles?

Any guidance would be appreciated. Thanks!
User avatar
mikel
Posts: 58675
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: T2 with DS Unlocked PCM from Another Vehicle – Installation Process?

Post by mikel »

You'll need to send the pcm to us to have the VIN changed to match the 2023, we charger $100 for the service.
From there it should all work as normal.
Give us a call at 561-908-0040 to set it up.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “T2 for Dodge/Chrysler/Jeep/Ram”