Is there documention that shows all the real time data??

mark03ram · Post by **mark03ram** » Thu Jun 28, 2007 11:48 am

Looking for something that breaks down the real time data parameters. What does each section contain and what does each parameter stand for?? The basics are obvious, rpm, coolant temp, fan, ect. What about the other abbreviated parameters.

Maybe a description and multipliers if needed so they make sense. Trying to figure out a lack of power issue with my truck and figured I might be able to log more indepth info to find the issue.

BTW its a 03 3500 with the 305/555 U7130 predator on the non stacked performance tune. No puck installed at this time.

duallydave · Post by **duallydave** » Thu Jun 28, 2007 2:55 pm

ive been looking for this too,when i look at it it looks like its in hiroglifics.hehehe

duallydave · Post by **duallydave** » Fri Jun 29, 2007 11:11 am

your a member of the dtr rite?do a post on there and see what comes up,theres some real smart guys on there.

Herculou · Post by **Herculou** » Fri Jun 29, 2007 1:41 pm

What is the DTR? and how do I get there?

mark03ram · Post by **mark03ram** » Fri Jun 29, 2007 7:34 pm

http://dieseltruckresource.com/

mark03ram · Post by **mark03ram** » Fri Jun 29, 2007 7:35 pm

Nothing so far, I cant believe there is no documentation on these parameters, that is crazy. I can not be the first guy that wants a break down and use's real time data.

chy46 · Post by **chy46** » Fri Jun 29, 2007 11:20 pm

ME TOO !!!

trik396 · Post by **trik396** » Sat Jun 30, 2007 1:14 pm

I replied on DTR about this subject. I have used the Diablo's real time date for trans temp, trans pressure, trans output shaft speed, intake air temp, intake temp in manifold, HPCR pressure which is in Mpa (to convert to psi multiply by 145), boost which you have to subtract normal air pressure of about 14.7 depending on your elevation. A bunch of other stuff that I can't remember right now. But there is alot more that I have no idea what it's telling me.... I too wish there was some type of paperwork describing what exactly I'm looking at. There is injector information but I can't figure out what I'm seeing... and that would be a HUGE plus if we can watch each individual injector and see what they are doing....

mark03ram · Post by **mark03ram** » Thu Jul 05, 2007 7:50 pm

Mine wont display the trans temp, or the preassure, I did play with the cr press, thanks for the multiplier. I just dont understand why everyone only does 90% of the job, I mean there is some great features in the pred, but would be nice if the documentation was better.

madmanwithmouse · Post by **madmanwithmouse** » Thu Jul 05, 2007 9:42 pm

and that would be a HUGE plus if we can watch each individual injector and see what they are doing....

Now that WOULD be a +, then we could know if an injector was shot!

johan · Post by **johan** » Fri Jul 06, 2007 8:03 am

Man, i have just done some serious digging and i can not find anything that describes the pids, ill look some more, if I find anything thats not too incriminating i will pass it along.

Is there documention that shows all the real time data??

Is there documention that shows all the real time data??

RE: Is there documention that shows all the real time data??

RE: Is there documention that shows all the real time data??

RE: Is there documention that shows all the real time data??

RE: Is there documention that shows all the real time data??

RE: Is there documention that shows all the real time data??