Page 2 of 7
RE: Re: RE: NEW iNtune UPDATE
Posted: Sun Apr 01, 2012 11:10 am
by Undersrtarmor
it is suppose to change all the files to 1R01H or just application?
also mine freezes alot when i hook to data viewer to log from the PC. will this help with that too?
<?xml version="1.0"?>
-<tool_info> <main svn="4210" sw_rev="1r01h" full_version="InTune-1r01h 03/29/2012 12:07:10 PM"/> <registration status="1" sn="CIBO290-1"/> <restore bc="14" vin="1B3ES66S84D595823" id="0"/> <db pid="1r01a" tune="1r01d" mfr="GM"/> <db pid="1r01a" tune="1r01a" mfr="DCX"/> <db pid="1r01a" tune="1r01a" mfr="FORD"/> <system_db vin="1r01a" info="1r01a" dtc="1r01a"/> <license tuned="1" avail="1"/> <updates count="1"/> </tool_info>
looks good?
RE: Re: RE: NEW iNtune UPDATE
Posted: Sun Apr 01, 2012 12:12 pm
by mikel
looks good.
RE: Re: RE: NEW iNtune UPDATE
Posted: Sun Apr 01, 2012 2:30 pm
by Undersrtarmor
thanks mike...
RE: Re: RE: NEW iNtune UPDATE
Posted: Sun Apr 01, 2012 5:55 pm
by rickrad
I plugged in the Intune and ran the updater and my Intune is up to date. Still cant perform a tune- still get the message saying: pcm calibration for (VIN) currently not supported. I have a 2008 jeep srt8. This is my info from the xml file:
<?xml version="1.0"?>
-<tool_info> <main svn="4210" sw_rev="1r01h" full_version="InTune-1r01h 03/29/2012 12:07:10 PM"/> <registration status="1" sn="CICTZD5-1"/> <restore bc="0" vin="1J8HR78358C101408" id="0"/> <db pid="1r01a" tune="1r01d" mfr="GM"/> <db pid="1r01a" tune="1r01a" mfr="DCX"/> <db pid="1r01a" tune="1r01a" mfr="FORD"/> <system_db vin="1r01a" info="1r01a" dtc="1r01a"/> <license tuned="0" avail="1"/> <updates count="2"/> </tool_info>
RE: Re: RE: NEW iNtune UPDATE
Posted: Mon Apr 02, 2012 10:54 am
by mikel
sounds like it is asking you to do a calibration update.
inTune update didn't work
Posted: Mon Apr 02, 2012 11:14 am
by 2K9GXP
Here's theinfo .xml file.
Thanks
Jim
Re: inTune update didn't work
Posted: Mon Apr 02, 2012 11:26 am
by mikel
2K9GXP wrote:Here's theinfo .xml file.
Thanks
Jim
can you try updating it again?
RE: Re: inTune update didn
Posted: Mon Apr 02, 2012 11:28 am
by 2K9GXP
Trying it again now.
Jim
RE: Re: inTune update didn
Posted: Mon Apr 02, 2012 11:46 am
by 2K9GXP
Still not working. Same msg as 1st post on topic. Tried to update twice.
Jim
RE: Re: inTune update didn
Posted: Mon Apr 02, 2012 11:51 am
by mikel
OK, investigating.
Re: RE: Re: RE: NEW iNtune UPDATE
Posted: Mon Apr 02, 2012 12:06 pm
by rickrad
mikel wrote:sounds like it is asking you to do a calibration update.
yes that is what its asking...how is that done though? When I plug it in to my laptop and run the updater it says it has the latest update. Not sure where to go from here.
RE: Re: RE: Re: RE: NEW iNtune UPDATE
Posted: Mon Apr 02, 2012 12:34 pm
by 06MonteSS
the calibration update is to update the calibration ID on the car's pcm... go to
www.diablosport.com/dcx for info...
Re: RE: Re: RE: Re: RE: NEW iNtune UPDATE
Posted: Mon Apr 02, 2012 1:33 pm
by mikel
06MonteSS wrote:the calibration update is to update the calibration ID on the car's pcm... go to
www.diablosport.com/dcx for info...
no, those are pred/trinity based instructions that show you how to do it with dsdl.
Just olug intune into a PC, let it run the cd rom drive if it asks for permission, and it will update automatically
RE: Re: RE: Re: RE: Re: RE: NEW iNtune UPDATE
Posted: Mon Apr 02, 2012 1:57 pm
by 06MonteSS
aaah yeah, forgot this was an intune....
Re: RE: Re: RE: Re: RE: NEW iNtune UPDATE
Posted: Mon Apr 02, 2012 4:06 pm
by Pod_Dog
mikel wrote:Just olug intune into a PC, let it run the cd rom drive if it asks for permission, and it will update automatically
It will update to what exactly? His unit is already updated to 1r01h and not working. I'm in the same exact boat as well, looking for resolution.