Diablosport Forums

I wonder if anyone with a 3.6 who is using a trinity has these issues? If not, I may just return it and pony up lol.

I have a theory, last summer I had a TSB from chrysler about a PCM flash (I don't remember what it was for). Well I had it done and they put a sticker on the frame under the hood. It just says they flashed the PCM and left a dealer code and a the date they did it. Did anyone else have this done? Maybe that's the problem.

Garza wrote:

HVACref mech Mitch wrote:amen brother.
and yeah best off to wait it out...some more. lol
im 50/50 on putting my name on the dotted line for a 2013 ram. dealer already has the truck and paper work all done up. this could be a deciding factor lol

Just so you they cut a lot power from 2012-2013 cars because police don't want to be faster then them!! You must have a charger?

Huh?? nnahh man, i have an '11 challenger, not a charger. What do u mean they cut horsepower from 2012 an '13 cars...didnt they increase horsepower for allllll dodge vehicles between 2010 and 2011 (the penestar 3.6 took us from 250 hp in 2010 to 305 hp in 2011, also they got rid of the 6.1 liter at 420 hp and increased its displacement to 6.4 Liters giving us 470 hp)
Unless, u meant to type RAM instead of car, in which case im pretty sure the ram has the same amount of horsepower as the '11 and '12 which is 390 ish (some dealer stickers are sayin 395). haha anyways man, police have the 5.7 liter hemi in their cruisers, or the few dodge cars they have for highway patrol etc, i still see some crown vic's around (not sure whats in those). Maybe its different in America.

Oconer wrote:it is saying PCM calibration for 23CDYAG7CH206593 might need an update. check for a calibration update? and i click the green check and does absolutely nothing

please post a copy of the info.xmlfile from the intune drive.

Most of you have already tried tuning your car before the release, which is why everyones tools are asking for an update.
After a moment of confusion with Wramanr's issue, I realized his calid was now supported, despite the leftover update request, which is why all he had to do was go to the car and load the tune. Anyone that is getgting the calibration failure on the PC side, please try just loading the tune to your car. If it still asks you for an update, and it is not downloading fromthe web, please post up a copy of your info.xml file from the intune drive.

Thanks

here you go

mikel wrote:

Oconer wrote:it is saying PCM calibration for 23CDYAG7CH206593 might need an update. check for a calibration update? and i click the green check and does absolutely nothing

please post a copy of the info.xmlfile from the intune drive.

Most of you have already tried tuning your car before the release, which is why everyones tools are asking for an update.
After a moment of confusion with Wramanr's issue, I realized his calid was now supported, despite the leftover update request, which is why all he had to do was go to the car and load the tune. Anyone that is getgting the calibration failure on the PC side, please try just loading the tune to your car. If it still asks you for an update, and it is not downloading fromthe web, please post up a copy of your info.xml file from the intune drive.

Thanks

Here another for

HERE IS MINE

mikel wrote:

Oconer wrote:it is saying PCM calibration for 23CDYAG7CH206593 might need an update. check for a calibration update? and i click the green check and does absolutely nothing

please post a copy of the info.xmlfile from the intune drive.

Most of you have already tried tuning your car before the release, which is why everyones tools are asking for an update.
After a moment of confusion with Wramanr's issue, I realized his calid was now supported, despite the leftover update request, which is why all he had to do was go to the car and load the tune. Anyone that is getgting the calibration failure on the PC side, please try just loading the tune to your car. If it still asks you for an update, and it is not downloading fromthe web, please post up a copy of your info.xml file from the intune drive.

Thanks

Hope you can help us work this out!!!!!!

Here is mine as well.

Mine is on the first page

I'm just waitng till Monday! Best thing to do is talk to a tech guy!

2 more days =[ I've waited since last Monday lol

my info.xml

mikel wrote:

Oconer wrote:it is saying PCM calibration for 23CDYAG7CH206593 might need an update. check for a calibration update? and i click the green check and does absolutely nothing

please post a copy of the info.xmlfile from the intune drive.

Most of you have already tried tuning your car before the release, which is why everyones tools are asking for an update.
After a moment of confusion with Wramanr's issue, I realized his calid was now supported, despite the leftover update request, which is why all he had to do was go to the car and load the tune. Anyone that is getgting the calibration failure on the PC side, please try just loading the tune to your car. If it still asks you for an update, and it is not downloading fromthe web, please post up a copy of your info.xml file from the intune drive.

Thanks

Any update on this pcm error issue all of us are getting!???

X2