Page 1 of 1

power puck problem need a part

Posted: Thu Aug 19, 2010 4:13 pm
by motoman006
ok im missing the plug that goes into the toggle switch, it has three wires white brown and green, and the switch is a 4 prong switch, i need to know where the wires go, or if i can get a new male end for the switch here is two pictures
help me out please!! see i have the female end (the switch) but its missing the male end to plug into the switch i just got the switch from you guys today

Image
Image[/list]

RE: power puck problem need a part

Posted: Thu Aug 19, 2010 5:15 pm
by mikel
Image
Image
Image
Image

RE: power puck problem need a part

Posted: Thu Aug 19, 2010 5:19 pm
by mikel
you only need the 3 wires you have shown.

RE: power puck problem need a part

Posted: Thu Aug 19, 2010 5:31 pm
by motoman006
so hook them up and ignore the yellow wire correct? ill try and see what i can do thanks again mike

can you also tell me which way is 60hp and which way is 90?