2011 Mustang GT A/F
Posted: Thu Aug 25, 2011 8:58 am
Just wondering when the wideband reading for a/f will be available through the trinity?
Page 1 of 2
RE: 2011 Mustang GT A/F
Posted: Thu Aug 25, 2011 9:54 am
our guys are working on that as I type this
RE: 2011 Mustang GT A/F
Posted: Wed Aug 31, 2011 3:25 pm
I see Revan Racing is currently using this feature, what are we looking at for an update release?
RE: 2011 Mustang GT A/F
Posted: Wed Aug 31, 2011 4:21 pm
email sent 
Re: RE: 2011 Mustang GT A/F
Posted: Thu Sep 01, 2011 4:57 pm
Is that good news? [email protected]mikel wrote:email sent
I really hate to bother you,but anxiously waiting.be glad to test anything you have,or ignor my dumb ass if I'm a pain in yours.Thanks BudRE: Re: RE: 2011 Mustang GT A/F
Posted: Thu Sep 01, 2011 5:14 pm
Test crom is coming your way Bud!
It has the WB PIDs, but they are not added to the existing layouts yet, go in and add them to the layouts and you'll be good to go
It has the WB PIDs, but they are not added to the existing layouts yet, go in and add them to the layouts and you'll be good to go
RE: Re: RE: 2011 Mustang GT A/F
Posted: Thu Sep 01, 2011 11:15 pm
Thanks Mike
RE: Re: RE: 2011 Mustang GT A/F
Posted: Fri Sep 02, 2011 6:28 pm
Success, Thanks again Mike, works great!
works great!RE: Re: RE: 2011 Mustang GT A/F
Posted: Fri Sep 02, 2011 8:56 pm
What about this for the Shelby GT500?
2011 V6?
Posted: Mon Sep 05, 2011 5:15 pm
Will the test crom work on a 2011 V6? Do you mind if I give it a shot as well?
RE: 2011 V6?
Posted: Tue Sep 06, 2011 10:35 am
should have a release version up today
RE: 2011 V6?
Posted: Sat Sep 10, 2011 9:08 pm
Hello just wonder if the A/F gauges will work on an 07 GT500
RE: 2011 V6?
Posted: Sun Sep 11, 2011 12:07 am
2011+ Mustangs and 2009+ F150's only. The earlier mustangs do not have wideband oxygen sensors
RE: 2011 V6?
Posted: Sun Sep 11, 2011 10:34 am
2012 Mustang GT
Got the update with the wide band, When I go to customize my own gauge layout I can only get one lambda gauge and one A/F . No previsions to change both to A/F or both to lambda. Are these reading off both O2 sensors or only one? Thanks, Matt
Got the update with the wide band, When I go to customize my own gauge layout I can only get one lambda gauge and one A/F . No previsions to change both to A/F or both to lambda. Are these reading off both O2 sensors or only one? Thanks, Matt
RE: 2011 V6?
Posted: Mon Sep 12, 2011 8:23 pm
Lambda and A/F are measurements of the same thing using both sensors so if you set both gauges to one or the other it would be like have two identical gauges at all times which is not useful in my opinion. Lambda is totally not useful because it based on the assumption that a lambda value of 1 = an A/F of 14.7. A/F ratio = lambda x 14.7
Usually the lambda shown with the predator or the trinity is the commanded (intended) value that the PCM wanted. If that is the gauge you have pulled up along side the new a/f ratio gauge then it may be useful to see if the lambda (commanded value) matches the actual a/f ratio picked up by the sensors.
Usually the lambda shown with the predator or the trinity is the commanded (intended) value that the PCM wanted. If that is the gauge you have pulled up along side the new a/f ratio gauge then it may be useful to see if the lambda (commanded value) matches the actual a/f ratio picked up by the sensors.