Need a Fix - Tranny Tuning Problem
Posted: Thu Dec 29, 2011 4:36 pm
The following thread was originally posted in the Backup Corrupt thread but was never resolved so I'll try again with a new thread.
I have a 2011 Silverado 1500 4x4 with the 6.2. The first thing I did to the Trinity was install all updates – even before connecting it to the truck.
With both the Diablo performance tune and the MPG booster tune installed, when I drive at approximately 70mph and put the gas to the floor (i.e., hit passing gear) the truck revs to the redline then feels like it slams into gear. The effect is very violent, like revving a car in neutral and dropping it in gear. If I hook my trailer to the truck I don't expect the transmission to survive very long.
mikel provided a new tune to try (In the previously mentioned thread) but the results were very soft shifting. The shifting felt like stock shifting or even softer - if that's possible. What I expect to see with a performance tune is quick and firm shifting without the revving to redline.
I'm currently running the stock tune because I don't want to damage the tranny. Can you please take another look at this problem.
I have a 2011 Silverado 1500 4x4 with the 6.2. The first thing I did to the Trinity was install all updates – even before connecting it to the truck.
With both the Diablo performance tune and the MPG booster tune installed, when I drive at approximately 70mph and put the gas to the floor (i.e., hit passing gear) the truck revs to the redline then feels like it slams into gear. The effect is very violent, like revving a car in neutral and dropping it in gear. If I hook my trailer to the truck I don't expect the transmission to survive very long.
mikel provided a new tune to try (In the previously mentioned thread) but the results were very soft shifting. The shifting felt like stock shifting or even softer - if that's possible. What I expect to see with a performance tune is quick and firm shifting without the revving to redline.
I'm currently running the stock tune because I don't want to damage the tranny. Can you please take another look at this problem.