Page 1 of 1
Jeep SRT8 2012 Trinity problem
Posted: Wed Jan 23, 2013 10:30 am
by Evgeniy
When loading writes:
Trinity dcx_gas does not support
Calid:05035772AB
Tool update might be available.
Updating didn't help
In what there can be a problem?
Re: Jeep SRT8 2012 Trinity problem
Posted: Wed Jan 23, 2013 11:03 am
by Jeep2011
I had the same issue with my hemi and I spoke to Vas. He told me to plug the trinity back to the computer and run the DS downloader again. There should be a button that says calibration updater. Click that and it will update the call ID. You should be fine after that.
Re: Jeep SRT8 2012 Trinity problem
Posted: Wed Jan 23, 2013 11:30 am
by Evgeniy
I connected, updating took place automatically, and the problem all the same remained
Re: Jeep SRT8 2012 Trinity problem
Posted: Wed Jan 23, 2013 11:35 am
by Jeep2011
You have to click on updater to update the call ID. It will not do it automatically. Once you open the DSDL there should be a button on the bottom right saying calibration updater.
Re: Jeep SRT8 2012 Trinity problem
Posted: Wed Jan 23, 2013 2:00 pm
by mikel
whats the VIN?
this is definitely a 2012, not a 2013 right?
Re: Jeep SRT8 2012 Trinity problem
Posted: Thu Jan 24, 2013 5:29 am
by Evgeniy
VIN- 1C4RJFDJ8DC541733
2012
Re: Jeep SRT8 2012 Trinity problem
Posted: Thu Jan 24, 2013 12:14 pm
by mikel
Evgeniy wrote:VIN- 1C4RJFDJ8DC541733
2012
Well, not sure how you get a car that is newer than you thought, but the 10th digit of the VIN determines the model year.
A=2010
B=2011
C=2012
D=2013
Hang tight....
Re: Jeep SRT8 2012 Trinity problem
Posted: Fri Jan 25, 2013 8:06 am
by Evgeniy
In documents there is a year 2012
Re: Jeep SRT8 2012 Trinity problem
Posted: Fri Jan 25, 2013 10:43 am
by mikel
Evgeniy wrote:In documents there is a year 2012
well, I dont know what they are or where they came from.
Your truck is a 2013
The VIN is ALL that matters, and according to Chrysler, and the DOT, your vehicles is a 2013 model....for most people thats good news
Re: Jeep SRT8 2012 Trinity problem
Posted: Tue Jan 29, 2013 4:03 am
by Evgeniy
There are news?
Re: Jeep SRT8 2012 Trinity problem
Posted: Mon Feb 04, 2013 2:21 pm
by Evgeniy
There are news?
Re: Jeep SRT8 2012 Trinity problem
Posted: Sun Mar 17, 2013 5:23 pm
by Evgeniy
There are news?
Re: Jeep SRT8 2012 Trinity problem
Posted: Mon Mar 18, 2013 12:16 pm
by mikel
No, we do not have an ETA for 2013 support yet.
Re: Jeep SRT8 2012 Trinity problem
Posted: Sat Jun 01, 2013 11:48 pm
by OzSRT
I just got my 2013 Vapor this week. I'd pre-ordered a Trinity as I'd not seen the info stating the 2013 unexpectedly had diff ECU software from the 2012. Now today I finally found this thread from all this time ago saying 2013 is still not here. Has it been that much of a drama to work it out given it's now June? I read a report from the SEMA show saying it was like 30 days away back last Nov. I was really looking forward to the arrival of the trinity, now I'm bummed. Its almost as bad as the fact I duped myself and didn't see all the fanfare regarding the 2014 SRT and all the major revisions which really annoyed crap out me. I thought a CAI and TB with Trinity would be a consolation prize till I can swap to a 2014 edition SRT..
