After Market Parts Combo

Post questions about your Trinity for your Dodge/Jeep/Chrysler vehicles here.

Moderator: mikel

Post Reply
User avatar
mastuning
Posts: 138
Joined: Mon Mar 11, 2013 5:20 pm
Location: Jeddah, Saudi Arabia
Contact:

After Market Parts Combo

Post by mastuning »

Dear Members,

I wanted to get something rolling with parts combination, currently i am not convinced that there is any beneficial aftermarket intake for the 6.1/6.4 Hemi's

Headers and Exhaust Options

Headers Kooks 1 7/8 (no cats)
Borla Exhaust

is what i have been using as a combo right now, we gain approximately 20-30 wheel with tuning.

curious as to what other combos you guys have chosen to use.
Image
User avatar
Mike_Levy
Posts: 6715
Joined: Fri Oct 26, 2007 8:11 pm
Location: Between Orlando and Tampa

Re: After Market Parts Combo

Post by Mike_Levy »

I've proven on the dyno that there is no advantage to running the 6.1 with no cats. My Jeep SRT8 (heads, cam, etc) lost a serious amount of power when running catless versus high flows. Plus she was no longer legal. High flow cats are definitely the way to go with the Hemis, and just about every other late model vehicle.

She also wasn't too fond of the Borla exhaust. Magnaflow was her favorite, and I went through 6 different exhausts to find the best one.
2021 BMW M550i xDrive
BMC Drop ins, JB4

2010 Nissan Murano beater
K&N Drop-in
User avatar
mastuning
Posts: 138
Joined: Mon Mar 11, 2013 5:20 pm
Location: Jeddah, Saudi Arabia
Contact:

Re: After Market Parts Combo

Post by mastuning »

well, in Saudi Arabia we dont have must SMOG restrictions. but high flow cats would be nice.


thanks for your post
Image
mraisi
Posts: 47
Joined: Thu Dec 27, 2012 2:04 pm

Re: After Market Parts Combo

Post by mraisi »

اخوي بدون دبات التلوث احسن ! افضل مستوى
Charger 2011 RT with Volant CAI , BBK TB 85 , BBK Long Headers , BBK mid pipe with HF cats , MaganaF Catback, SLP 25% underdrive pully ,180 JET TSTAT, NGK Iridium XI , Diablo sport Trinity tuned by Johan. CAM coming soon
User avatar
mastuning
Posts: 138
Joined: Mon Mar 11, 2013 5:20 pm
Location: Jeddah, Saudi Arabia
Contact:

Re: After Market Parts Combo

Post by mastuning »

السلام عليكم,
انا برمجت بدون و فل هدرز في راي و الداينو ما يغلط شفت مستوى افضل بالهدرز

شكرا على تعليقك
Image
mraisi
Posts: 47
Joined: Thu Dec 27, 2012 2:04 pm

Re: After Market Parts Combo

Post by mraisi »

اخوي ما فهمت عليك
أنا قصدي الهيدرز كامل من دون دبات تلوث أفضل من وجود الدبات ولا مع دبات التلوث؟؟
Charger 2011 RT with Volant CAI , BBK TB 85 , BBK Long Headers , BBK mid pipe with HF cats , MaganaF Catback, SLP 25% underdrive pully ,180 JET TSTAT, NGK Iridium XI , Diablo sport Trinity tuned by Johan. CAM coming soon
User avatar
mastuning
Posts: 138
Joined: Mon Mar 11, 2013 5:20 pm
Location: Jeddah, Saudi Arabia
Contact:

Re: After Market Parts Combo

Post by mastuning »

هلا اخوي

امس برمجت charger SRT8 بهدرز و بدون العلب الرصاص )(العادم) و هوا افضل شيء صراحتا

stock on my dyno Mainline Dynolog is 360-370

this result is of a very conservative tune kinda rich AFR as our gas quality is kinda poor

AFE intake (i do not favor it, i am sure if we removed it and used stock we could he gotten an additional 5-7 hp
KOOKS headers test pipes to stock exhaust.

loaded my tune and put the car on the dyno did one run and bam!

Image
Image
Post Reply

Return to “Trinity Dodge Gas”