Page 1 of 1
The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 6:29 am
by Vladimir5145409
Hello!
EGG 3.5L High Output V6 24V MPI Engine
DGJ 5-Speed Auto W5A580 Transmission
Bought a new inTune and tried to install but said it was not support.
All updetes are installed.
Help me please!
E-mail:
[email protected]
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 10:53 am
by mikel
it is asking you to connect to a pc for an update
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 10:55 am
by Vladimir5145409
mikel wrote:it is asking you to connect to a pc for an update
There is no more updates.
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 11:01 am
by Vladimir5145409
mikel wrote:it is asking you to connect to a pc for an update
Can you give me .drg file with my VIN?
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 11:04 am
by mikel
connect it to a pc and it will download the file to your tool automatically
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 11:05 am
by mikel
it must have loaded it already, go to the vehicle and select tune vehicle/write vehicle and t will prompt you to load the update then you can tune it.
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 11:06 am
by Vladimir5145409
mikel wrote:it is asking you to connect to a pc for an update
I have European Chrysler 300.
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 11:16 am
by Vladimir5145409
mikel wrote:it must have loaded it already, go to the vehicle and select tune vehicle/write vehicle and t will prompt you to load the update then you can tune it.
.drg from updater has been loaded
Updater said: "This inTune is up to date"
When I plug tool into vehicle, and select Tune Vehicle Write Vehicle, he said "Vehicle is not supported"
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 11:44 am
by mikel
post the current info.xml file please.
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 11:47 am
by Vladimir5145409
mikel wrote:it must have loaded it already, go to the vehicle and select tune vehicle/write vehicle and t will prompt you to load the update then you can tune it.
How can I use this inTune?
If my vehicle is not supported.
Here is file:
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 11:55 am
by Vladimir5145409
I think that my VIN is missing in database, because vehicle produced in Belgium.
Is it possible?
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 11:59 am
by Vladimir5145409
Can you send me .drg file with my VIN?
Thanks!
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 12:44 pm
by mikel
could you give us a call with the tool powered up in the vehicle so we can attempt to force a calibration update?
Re: The Vehicle is not supported (300C 3.5V6 2007)
Posted: Tue Apr 01, 2014 1:06 pm
by Vladimir5145409
mikel wrote:could you give us a call with the tool powered up in the vehicle so we can attempt to force a calibration update?
Thanks for help!!!!
I wrote program in ECU !!!