Page 1 of 2
predator u7136 help!
Posted: Tue Apr 01, 2014 1:32 pm
by Adolfoguti100
Hi I have a predator I bought used have the original box ,disk and cords it's not married only to my charger I have 89 Oct 12% throttle. I recently bought 22s but I can't change tire size nor the tcm it says this tool is not licensed
Re: predator u7136 help!
Posted: Tue Apr 01, 2014 3:34 pm
by garrett
the vehicle licensing message refers to the marriage of the tool. under options/show last tune written what is listed ?
Re: predator u7136 help!
Posted: Tue Apr 01, 2014 7:32 pm
by Adolfoguti100
It says PCM:
Perf 89 Oct
Continue
PCM:
05094955AC
Vin:
Continue
Re: predator u7136 help!
Posted: Thu Apr 03, 2014 2:16 pm
by Adolfoguti100
Any reply to my problem?
Re: predator u7136 help!
Posted: Thu Apr 03, 2014 2:46 pm
by mikel
there is no vin shown on that screen, or you didn't scroll down?
also, post what it shows under options/troubleshooting/show VIN and show calid while plugged into the vehicle please.
Re: predator u7136 help!
Posted: Thu Apr 03, 2014 3:43 pm
by Adolfoguti100
In Vin there's nothing and calid says pcm 05094955AC I scroll down and nothing
Re: predator u7136 help!
Posted: Fri Apr 04, 2014 11:43 am
by Adolfoguti100
Any help or solution?
Re: predator u7136 help!
Posted: Mon Apr 07, 2014 4:56 pm
by Adolfoguti100
Anyone? ??
Re: predator u7136 help!
Posted: Mon Apr 07, 2014 5:02 pm
by mikel
so there is no VIN?
If you go to options/troubleshooting/show VIN and Show calid, what is reported?
Thanks
Re: predator u7136 help!
Posted: Mon Apr 07, 2014 11:45 pm
by Adolfoguti100
The vin has nothing even if I scroll down or up and calid says 05094955AC that's it
Re: predator u7136 help!
Posted: Tue Apr 08, 2014 7:07 pm
by Adolfoguti100
Any suggestions?
Re: predator u7136 help!
Posted: Wed Apr 09, 2014 9:45 am
by mikel
If you go to options/troubleshooting/show VIN and Show calid, what is reported?
Re: predator u7136 help!
Posted: Wed Apr 09, 2014 10:02 am
by Adolfoguti100
Show vin
Vin:
Continue
Show cal id
Pcm:05094955AC
Continue
That's it if I scroll up down there's nothing just that
Re: predator u7136 help!
Posted: Wed Apr 09, 2014 11:38 am
by mikel
somehow the pcm lost its vin, and that will need to be programmed to make it all work again...
Re: predator u7136 help!
Posted: Wed Apr 09, 2014 11:39 am
by Adolfoguti100
And how could I do that? ???