2013 Camaro SS Won't Start After Changing Parameters
Posted: Sat Mar 05, 2016 6:12 pm
So let me start by saying this is probably my fault. I first installed my Diablo tune on my Trinity back in 2013 or 2014 and had not messed with it since. Today i was messing around with the idle settings in park/neutral because i wanted to increase my idle RPM after installing a new camshaft. I added 100 rpm to the tune, saved the tune then tried to install it all while i still had my vehicle running ...my fault. As the tune was writing, the car stumbled then shut down after reaching 45%. The trinity then read there was an error installing the tune and the original backup would be restored.
The device then tried to install the original back up tune file but failed to restore the original factory tune. I unplugged the trinity, disconnected the battery, reconnected the battery and tried to start up the device again. After clicking onto performance in the menu, my Trinity says it cannot connect with my PCM and there are now no original tune files to restore to the vehicle.
My car will not start now, wont even crank over. I fear that my factory tune has been deleted, what do I do?
The device then tried to install the original back up tune file but failed to restore the original factory tune. I unplugged the trinity, disconnected the battery, reconnected the battery and tried to start up the device again. After clicking onto performance in the menu, my Trinity says it cannot connect with my PCM and there are now no original tune files to restore to the vehicle.
My car will not start now, wont even crank over. I fear that my factory tune has been deleted, what do I do?