Re install my Diablosport T1000

Post here with any questions specific to the use of the i2 on Chrysler vehicles.

Moderator: sohfast94

Post Reply
Mubarak123
Posts: 7
Joined: Mon Jul 08, 2019 5:03 am

Re install my Diablosport T1000

Post by Mubarak123 »

Diablosport T1000 was installed to my Dodge Ram 1500. I gave the vehicle to the dealer for a accident repair. Now the setup being back to factory setup. I would like to know how to re install the old programming setup of Diablosport T1000. Please advice.
dizunuvezu
Posts: 2
Joined: Mon Aug 19, 2019 10:13 am

Re: Re install my Diablosport T1000

Post by dizunuvezu »

Mubarak123 wrote:Diablosport T1000 was installed to my Dodge Ram 1500. I gave the vehicle to the dealer for a accident repair. Now the setup being back to factory setup. I would like to know how to re install the old programming setup of Diablosport T1000. Please advice.
Hi buddy, how far I know that is done from there end as of now.

Regards,
Hahu Smith Plex Tutuapp Vidmate
Last edited by dizunuvezu on Mon Aug 19, 2019 3:31 pm, edited 1 time in total.
User avatar
mikel
Posts: 58701
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Re install my Diablosport T1000

Post by mikel »

if you didn't restore the stock tune prior to taking it in for service you'll need to call with the device powered up so we can reset it.

Always restore if taking the vehicle in for service :)
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “i2/i3 for Dodge, Chrysler, Jeep and Ram”