I finally found it. I had to use the show all to get to it though and just scroll through them one by one.

Thanks for the help.

Where can I find the PID to monitor the Bank 1 and Bank 2 O2 voltages to datalog on the Intune menu.

Vehicle is a 2007 Corvette running the diablosport 91 tune.

Thanks for any help

did you restore original backup to the vehicle first before you went to the dealer I hope????

and the message you are getting means that the CAR needs an update, not the tool....

http://diablosport.com/dcx




I don't want to hijack the thread here, but this response concerns me about how the ...

Thanks Lew,

I appreciate all your help.

everyone in this office has a Win7 PC in front of them, and the same intune driver is loaded to all of them..

try this
open my computer
right click on diablosport cd rom drive and select open
then right click the intune.exe and select run as administrator, and it should load the drivers.

FWIW ...

I'm kind of slow.... sorry.

Just so I am clear. If I restore my car to stock tune, that will also reset the diablosport tunes to the default values on the device as it was shipped? Removing any of the adjustments I have made.

So as long as I don't return to stock. I can continue to make ...

that's normal man.. both banks are not usually exactly the same... so a few percentage difference between them is fine and normal, nothing to worry about...

when logging, you want to make sure you do it during the warm part of the day - not at night or morning when air temp is cooler... plus, need ...

So I recieved my Intune and succesfully installed the 91 Octane tune on my 2007 Corvette. I also have TCM support and installed the Firm tune that was available (not the hard tune).

As previously suggested I have driven the car a few hundred miles and allowed the fuel trims to settle. I have ...

Lew,

I have about 100 miles on the 91 tune now. I downloaded the DSlogRedux program from your site. My plan tomorrow is to do a freeway run for a full log and try to keep the rpm's around 2k. You indicated earlier that it would be ok to do this in 5th on the C6.

The logs I created earler and ran ...

No, dont really need guages. Just was noticing while logging that the parameters were being displayed in metric units and was curious if there was a setting I could change.

Thanks for the response.

So I noticed today while logging that some of the parameters (speed) were being shown in metric untis rather than MPH. Is there a way to fix that.

Also, when can we expect support to playback the log file on the intune itself. How about guage support as well.

Thanks for the help.

Thanks Mike,

Will do when I get a chance. I'm kind of learning where to press and using a notepad stylus would probably be a good idea for my fat hands anyway


ETA: The tip on the stylus has solved all of the problems. No need for a screen recal at this time.

Thanks Mike

So I got my intune. I have TCM support for my '07 :D

The screen on this thing is hard to push the buttons and my fat fingers can't always get it to confirm a response.

Can we get an answer to what does the Touchescreen Calibration option do... and how can it be used.... the origional topic of ...

Hi all,

I just recieved my Intune. I followed all the instructions and it appeared to have a little glitch when I first connected it to my computer to make sure it was updated prior to tuning my Corvette.

Initially I got an error that the usb drivers could not be installed, I waited a little bit ...