No high idle
Moderator: mikel
No high idle
I was installing the performance tune and i wanted to modify it for tire size and high idle but they were not there? The only things i could adjust were rev and speed limits. I really need the high idle for winter if there is any update i can do it would be awesome!
- mikel
- Posts: 58675
- Joined: Tue Jan 16, 2007 1:17 pm
- Location: DiabloSport World Headquarters
- Contact:
RE: No high idle
what vehicle, tool, revision?
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST
[email protected]
RE: No high idle
i'm sorry its an 03 ram 2500 with the 5.9 with the predator u7130 with i think the latest update.
03 cummins with pred off, straight pipe, afe, filters, Fass lift pump, and adjustable boost elbow.
RE: No high idle
don't think the high idle option works on the 7130 and for sure there is no tire size changing
Reg
2005 3500 Quad Cab Laramie L/B
Predator, AFE stage II, boost fooler
Pillar Mount gauges Billet low stall TC
2005 3500 Quad Cab Laramie L/B
Predator, AFE stage II, boost fooler
Pillar Mount gauges Billet low stall TC
RE: No high idle
I thought i read somewhere that you could adjust that... Well thats gay if there's not one my truck needs it in the winter.
03 cummins with pred off, straight pipe, afe, filters, Fass lift pump, and adjustable boost elbow.
RE: No high idle
pretty sure dealers can turn it on if its not on. Is yours an auto or manual. if its a manual then there is some other stuff to do to make it work. http://www.cumminsforum.com/forum/3rd-g ... -idle.html here is some info on it
Reg
2005 3500 Quad Cab Laramie L/B
Predator, AFE stage II, boost fooler
Pillar Mount gauges Billet low stall TC
2005 3500 Quad Cab Laramie L/B
Predator, AFE stage II, boost fooler
Pillar Mount gauges Billet low stall TC
RE: No high idle
yea i have a manual
03 cummins with pred off, straight pipe, afe, filters, Fass lift pump, and adjustable boost elbow.
RE: No high idle
I didn't read the link above, it probably contains the info you need. But you have to ground pin #22 in the rear pcm plug with a pigtail from cummins in order to use high idle. And then it has to be enabled either by a programmer (appearently not in your case) or by the dealer