predator question.....

liljohn30 · Post by **liljohn30** » Sat Jan 29, 2011 5:22 pm

about 3 weeks ago i was haveing shifting issues with my 08 hemi ram.i returned the pcm to stock and brought it to dodge to figure out wtf..after 3 days trans was fine and all they did was a pcm flash to cure the issue..today i tried to re install the predaotr and i have this saying,,

your calibration is 05094507 AI and is not supported we need to downgrade to 05094507 AH in order to continue..
I dont wanna run into the issue i had before so i need help what is the diference between the 2 and is there a way to utilize the predator with the calibration i have now.What steps do i need to take, i would like to b able to reinstall the flash in the truck now in case of any issues that may arise,mainly i dont wanna downgrade to the other issue and have the shifting issue pop back up again..Help please.....................

liljohn30 · Post by **liljohn30** » Sat Jan 29, 2011 5:35 pm

tool says i have version v 9r08

Post by **mikel** » Mon Jan 31, 2011 11:45 am

I would update to 9r09 first, then try it again.

liljohn30 · Post by **liljohn30** » Mon Jan 31, 2011 4:25 pm

will do,any explaination as to why it happened

liljohn30 · Post by **liljohn30** » Mon Jan 31, 2011 5:44 pm

i download the new crom 9r09 loaded into tuner and i get the same thing mike

Post by **mikel** » Mon Jan 31, 2011 6:03 pm

emailed you as newer update to try.

liljohn30 · Post by **liljohn30** » Tue Feb 01, 2011 2:50 pm

figured what i did wrong mike,i never hit the continue buttom,once i did and went to the next screen it made sense.I hooked the tool up to the pc and it automatically did the update,haven't tried to load it in the truck yet ,will keep in touch

liljohn30 · Post by **liljohn30** » Tue Feb 01, 2011 4:00 pm

mike i tried to load ,after about 5 mins of loading and i had to cycle the key a few times it said write failed,make sure key was in on position ,which it was ...reboot was flashing

liljohn30 · Post by **liljohn30** » Sun Feb 06, 2011 5:02 pm

to the top,for an update

liljohn30 · Post by **liljohn30** » Tue Feb 08, 2011 4:47 pm

any info on the ai update from the dealer,i want to use the predator will any of the croms work.if not i will sell the tool its no use to me on my couch

wmfortenberry · Post by **wmfortenberry** » Thu Feb 10, 2011 4:00 pm

I have 2008charger srt and a u7135. It had 9r17 version on it and tried to update to 9r27 but would freeze on 7764 and tool would say unable to save image file. Tried the trouleshoot many times and with no sucess. I finally got one to load but its 9r12 and can't get 9r17 back on it. Need help, dowloaded current files from website. So if I managed to reinstall 9r12 are the 9r17 and 9r27 having issues? Thanks

Post by **mikel** » Thu Feb 10, 2011 5:40 pm

wmfortenberry wrote:I have 2008charger srt and a u7135. It had 9r17 version on it and tried to update to 9r27 but would freeze on 7764 and tool would say unable to save image file. Tried the trouleshoot many times and with no sucess. I finally got one to load but its 9r12 and can't get 9r17 back on it. Need help, dowloaded current files from website. So if I managed to reinstall 9r12 are the 9r17 and 9r27 having issues? Thanks

If you have an 08, and an older Predator, all you need is 9r12.

wmfortenberry · Post by **wmfortenberry** » Thu Feb 10, 2011 5:52 pm

Thanks, will install now and enjoy.

liljohn30 · Post by **liljohn30** » Fri Feb 11, 2011 2:11 pm

any updates mike
u7137
9t10c
2008 hemi ram

liljohn30 · Post by **liljohn30** » Mon Feb 14, 2011 3:29 pm

any more ideas