New U7192 problem data logging

[classic07]

I connected my Predator and tried to do a data log. I selected short and think I recorded about 5 km of cruising, filled about 7 percent of memory. I then disconnected the unit and took it inside to download to my laptop. I started up Dataviewer 3.3 and it cannot find a log. I manually went through the log menu and could not find my log data. So my question is what is the proper way to create a data log on my predator?

BTW, I have searched the forums and did not find anything to help. A full manual for 7192 would also be nice.

U7192
9r13
2007 Chevrolet Silverado classic 5.3

[06MonteSS]

you need to press the ESC button if you want to stop/save the data log in the middle like that...

press the ESC button a few times until back at the main menu... or press the ESC button and respond to any prompts given on the screen...

[classic07]

Thank you, that is working for me. Now I need to sift through the data and then run it through redux.

[classic07]

So I have reviewed the data, ran it through redux, got a recommendation and customized the tune. Now I want to check WOT. I start the full logging function wait until I see data being recorded on the predator and take off hard and long then cruised a bit. I reviewed the data in excel and there are no readings for my WOT run, just the cruise part. Can the predator not record all the parameters during a WOT? Do I need to record only certain parameters for proper WOT data recording?

[Ill_Born_SS]

http://diablosport.com/index.php?name=P ... opic&t=917