SRT-4 Halt Monitering Issue!!!! please help

Post by **mikel** » Mon Mar 19, 2012 12:03 pm

I agree, I know you came into this late, but I have mentioned that I can reproduce this, and have made our engineers aware of it.

I would like to think the fix is simple as well, but I need to get the time freed up for them to look into it at this point

nemiro · Post by **nemiro** » Mon Mar 19, 2012 3:14 pm

I did come into it here late, but it has been brought up a number of times on the other forums. I've had two customers shy away from Trinity, due to this singular issue, now. The hornet's nest is getting stirred up again on the srtforums, and I do recommend that you check it out. If we could just revert to 1r07 for now, and we can figure out the best route later, that would at least give folks the option, and avoid this issue for now.

Post by **mikel** » Mon Mar 19, 2012 3:17 pm

I see it over there, and have replied several times.

My lack of reply does not mean its not still on the top of my list of things I want fixed.
It also affects 03-05 Rams, both gas and diesel.

nemiro · Post by **nemiro** » Tue Mar 20, 2012 12:07 am

OK, I appreciate you keeping it on the to do list!

nemiro · Post by **nemiro** » Wed Apr 11, 2012 2:10 am

Any updates on this, Mike?

Post by **mikel** » Wed Apr 11, 2012 5:03 pm

still buried in intune development...

nemiro · Post by **nemiro** » Fri Apr 13, 2012 2:06 pm

VERY frustrating.

redline05srt · Post by **redline05srt** » Sat May 05, 2012 2:48 pm

Let me guess mike your still trying to free up time for this issue that's well over a year old now. With the intune issues and new cars keep pushing us further and further to the back of the line. Sure would be nice if the monitoring feature actually worked and we could do a full log with all the pids we need.

nemiro · Post by **nemiro** » Mon May 07, 2012 8:01 pm

If you can't fix it right now, give us an option to go back to an earlier firmware that did not have this problem. I believe we know which version this issue popped up with, and which versions do not have the issue. Putting everyone off all the time is just putting people off the product.

Post by **mikel** » Tue May 29, 2012 5:09 pm

I have a new update that should address this issue, please feel free to give it a shot and let us know!!

Thanks for your patience.

nemiro · Post by **nemiro** » Tue May 29, 2012 5:52 pm

Thanks Mike for pushing this through! Will test this ASAP!

Post by **mikel** » Tue May 29, 2012 6:04 pm

cool deal.

I'd love to get feedback asap, while its still fresh in his head!!

duster360 · Post by **duster360** » Wed May 30, 2012 9:54 am

I could not tell any improvement at all.

Monitoring still locks up after 15-20mins
layout still fails on startup

Post by **mikel** » Wed May 30, 2012 12:32 pm

Bummer.

Gizmodo seemed to notice a little difference, but not much better....I have forwarded the feedback and should have something new to try soon.

Thanks

Post by **mikel** » Wed May 30, 2012 5:13 pm

trying to reproduce this again, on the same PCM i did it on in 10/11 last year, and having NO luck..Whats different???

Its Nicks calid, and your layout, exact same combo I used in October when I first reproduced it....