can't adjust torque management

[2005silverado]

i can't adjust the torque management settings? thanks

[hof740]

You can only do that in custom tune mode and only for WOT torque reduction I believe. Obviously its under the TCM sectionThese tuners are pretty limited but good for the average guy who wants a little more power from his stock truck. The real tuning for major mods you have to pay someone like Lew for

[mikel]

i can't adjust the torque management settings? thanks

here you go, upshift abuse mode off.

[aw73]

my 2004 chevy silverado 2500 6.0l doesnt shift any firmer no matter what shift pressure i have it set at, does this mean the torque management is still on? i see it in the menu but there is nothing there when i select it.

[mikel]

post your tune files.

[aw73]

heres my tunes.

[AllUSA]

:

[mikel]

heres my tunes.

it is already disabled in this tune.

[mikel]

:

if you are looking for the same fix please post the backup file as well.

[aw73]

:

if you are looking for the same fix please post the backup file as well.

i think he posted that for me.

[aw73]

heres my tunes.

it is already disabled in this tune.

if it was already disabled then doctortuned must have done something different cause it does seem to shift a little firmer.

[AllUSA]

Yes I changed a few parameters. should feel better. Let me know if you need anything else.

[aw73]

Yes I changed a few parameters. should feel better. Let me know if you need anything else.

ok thank you!

[aw73]

Yes I changed a few parameters. should feel better. Let me know if you need anything else.

there is still a big pause from 1st to 2nd when i am at half throttle. 2nd to 3rd to 4th seems fine. if i am giving just a bit of throttle it seems fine. not sure about wot. what do you think that could be?

[cbaker22681]

I cant adjust Torque management either it is empty no matter what tune I use. Can you check mine as well and disable it if it is not already.. Also no matter what settings I use for shift times, pressures, WOT, Partial, etc I cant tell any difference in the shifts. Most posts I have seen say they have a choice when tuning the diablo tune to do a firm shift. My tuner gives me no option when applying the tune for any firm shift.

Any help would be appreciated..

Truck is a 2000 Silverado 4.8L 4spd Auto

Attached are the current tune files. I reinstalled the default diablo tune and only changed the injector slope. So any help with the torque management and other adjustments would be great and very appreciated