Intune i2 2030 Problems. Logging,

info.xml

(2.48 KiB) Downloaded 68 times

Hello all,
All I have to say is thanks for this awesome and very helpful tool.
I own a 2005 GMC Sierra ext cab. z71 offroad. the engine is a 5.3l 327 H.O. VIN B L 33.
The issues i'm having has to do with the i2 rebooting while recording a log.
Also the scan tool function tells me that there are 101 active trouble codes.
I tried to clear the codes no luck.
Any help would be awesome.

Best regards,

Michael S. Hogan.

[mikel]

can you elaborate on the reboot while logging?
The Multiple P000 issues will be fixed shortly.

Hi Mike,
When driving around I will log my trips about forty miles each way. In the middle of my drive the i2 will suddenly reboot while recording a log.
I'm Just wondering if the logger, while recording runs out of storage and causes the i2 to reboot.
I wish there was a monitor only option for my temperatures without having to record a log while plowing.
I hope this info helps. I trust the i2 temp readings because of accuracy. The gauges are off a bit I just replaced my gauge cluster bulbs.
It is going to take a while to line the needles up exactly. As of now I just have the temp needle left to adjust.
This i2 is great.

Very best,
Michael S. Hogan

[06MonteSS]

wow! that'd be a huuuge log.. and yes, it will run out of room trying to save a log too big and it won't do it... could definitely be your issue bud..

Get the Torque app for your phone and a bluetooth connector and you can use the Torque app for gauges to just monitor things....

[mikel]

Or upgrade to something like T2 better yet

[06MonteSS]

Yeah.. can trade in that old intune for a $100 credit and buy the Trinity T2 EX 9245 Platinum programmer instead, and have the best of both worlds... tuning/logging, and data/gauge monitoring...

[mikel]

T2 with the trade in is actually around $450, so more than $150 toward a t2

[06MonteSS]

mikel wrote:

T2 with the trade in is actually around $450, so more than $150 toward a t2

oh nice!! credit went up! cool...