Saw PID Unlock

Post here with any questions specific to the use of the i2 on Chrysler vehicles.

Moderator: sohfast94

Post Reply
MyChallyNow
Posts: 38
Joined: Mon Dec 29, 2014 8:09 pm

Saw PID Unlock

Post by MyChallyNow »

So I see a PID that says number of flashes since unlock. Does this mean that the PCM is Unlocked?
User avatar
mikel
Posts: 58685
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Saw PID Unlock

Post by mikel »

where do you see this PID??
Was your pcm sent here to be unlocked?
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
MyChallyNow
Posts: 38
Joined: Mon Dec 29, 2014 8:09 pm

Re: Saw PID Unlock

Post by MyChallyNow »

Car is not home right now...but under live with dataviwer open and i3I hooked up I saw this pid.

Car was at dealer recently and they hooked up and left running for about a half hour. I could not get a straight answer as to what was going on. Maybe curious about some data that the car had on board.
10 to 20 below ambient intake temperature readings recently when I was doing some testing.
So when I got home i hooked back up to i3 next day I did see that.
No i did Not send my PCM into you for unlock.
User avatar
mikel
Posts: 58685
Joined: Tue Jan 16, 2007 1:17 pm
Location: DiabloSport World Headquarters
Contact:

Re: Saw PID Unlock

Post by mikel »

Im not sure what you were seeing, but your pcm is indeed locked if it hasnt been sent in to be unlocked.
Mike Litsch
DiabloSport Brand Manager
Diablo Tech support by phone:
561-908-0040
M-F 8:00 AM to 5:00 PM EST

[email protected]
Post Reply

Return to “i2/i3 for Dodge, Chrysler, Jeep and Ram”