U7135 Is shift firmness increased in the Performance Tunes?

[nagelm123]

Searched but couldn't find an answer.

I'm assuming it is....

TIA!
Matt

[RPaulG87]

Mine kicks like a muel going from 1st to 2nd with the 6.1l...so I guess so? What exactly is "shift firmness"? I could be mistaking it, it's very on time...just rough.

[mikel]

6.1, yes, 5.7, no....

[nagelm123]

6.1, yes, 5.7, no....

Thanks!

I've got an R/T (5.7). Can I modify the firmness in the performance tune?

[mikel]

Yes, under quick adjust.

[RPaulG87]

Yes, under quick adjust.

I can't find this, all I see is raised\stock shift points...

[nagelm123]

Yes, under quick adjust.

I can't find this, all I see is raised\stock shift points...

I'll try later and report back....

[RPaulG87]

Yes, under quick adjust.

I can't find this, all I see is raised\stock shift points...

I'll try later and report back....

I did some research and apparently it's under "stock tune modify" so I don't know if that even effects it if you're using a diablo tune :-\

[mikel]

No, it is in the Quick Adjust menu, you dont want tomodify the stock tune.

[RPaulG87]

No, it is in the Quick Adjust menu, you dont want tomodify the stock tune.

Could you show me where shift firmness is then, because I can't find it I just went down to plug it in and check, I see axle, shift points, dyno, and tire size...that's all under quick adjust...and under shift points it's raised or stock, no firmness setting :-\

[mikel]

what is your calibration ID?

[RPaulG87]

what is your calibration ID?

I'll have to find that out next time I go out, what would that change? I originally used this on a 300c SRT-8 (2008) and reflashed it to 9r27 for the Challenger...does the 91 octane perf tune change firm shiftness? if it does then that would explain the kick I get now going from 1st to 2nd which causes the tires to bark..

[nagelm123]

Yes, under quick adjust.

I can't find this, all I see is raised\stock shift points...

I'll try later and report back....

Easy...

Go to Performance Tunes
You will have to accept, then turn key on, continue
Then to Quick Adjust
Then to Transmission and then you'll see it.

[RPaulG87]

I can't find this, all I see is raised\stock shift points...

I'll try later and report back....

Easy...

Go to Performance Tunes
You will have to accept, then turn key on, continue
Then to Quick Adjust
Then to Transmission and then you'll see it.

Yeah mine doesn't have that option :-\

[RPaulG87]

OK from what I've gathered SHIFT firmness is not available on 6.1l models..why is this? :-\